User Manual

2. Fitting
2−15
Festo P.BE−SPC200−EN en 0901d
Proceed with fitting as follows:
1. Push the control panel into the cut−out in the front plate.
2. Hang the fastening clamps from the rear into the
appropriate cut−outs.
3. Screw the control panel to the front plate.
1 Control panel
2 Front plate
3 Fastening clamps
4 Fastening screws
1.
2.
3.
1
2
3
4
Fig.2/7: Fitting control panel type SPC200−MMI−1F