User Manual
1. Summary of components
1−30
Festo P.BE−S PC200−EN en 0901d
WinPISA provides the following functions:
graphically supported configuration of the current project
a user−friendly Editor for NC programming based on
DIN66025
load functions for programs, projects, etc.
a graphical function for analyzing the positioning
behaviour.
WinPISA supports single−axis applications and multi−axis
applications with up to four axes.
Position list As an alternative to the direct entry
of positions (e.g. X100)
when programming, you can also specify positions by
means of the position register. You simply need to enter the
desired position in the program register (e.g. X@1).
100 position registers are available per axis.
In WinPISA you can map the position register by means of the
position list. The position
registers of all the axes are
grouped together under the same index in the position list
and are given a name as a symbolic position. You can then
use the names of the symbolic positions in user programs
instead of specifying position registers.
Please note
From operating system version 4.63 onwards, position
registers (@n) can also be used for saving speed and ac
celeration values and other parameters. Detailed informa
tion can be found under the specific NC commands, see
section 7.2.3.