User Manual

1. Summary of components
1−28
Festo P.BE−S PC200−EN en 0901d
Control panel Control panel type SPC200−MMI−1... has a two−line LCD dis
play. Up to 16 characters per line can be represented. The
control panel has six buttons with which all functions can be
accessed by menu.
Control panel type SPC200−MMI−1 can be placed directly on
the SPC200. Control panel type SPC200−MMI−1F is intended
for mounting
in a front plate.
1
2
3
1
Display (LCD display with 2 x 16 characters)
2 Touch−sensitive keyboard
3 Interface to the SPC200 on the rear
Fig.1/10: Control panel type SPC200−MMI−1
The control panel offers all the necessary functions for com
missioning, programming, diagnosing and operating directly
on the SPC200. The control panel provides editor functions
for editing position registers and programs.
You can enter positions or programs via menus on the key
board.
If your positioning system is built−up completely, you
can move to positions very easily and transfer them to the
position register with the Teach functions.