User Manual

D. Index
D−27
Festo P.BE−SPC200−EN en 0901d
Test single−bit operand for 1−signal (NC command #T) 7−86 .
Text markings XIV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time behaviour
Time
behaviour at start of sequence 5−7 . . . . . . . . . . . . . .
Time behaviour in Record Select mode 5−19 . . . . . . . . . . .
When acknowledging a fault 5−8 . . . . . . . .
. . . . . . . . . . . . .
With a Programmed Stop 5−15 . . . . . . . . . . . . . . . . . . . . . . .
TOL (axis status flag Axis in the tolerance window)
7−22 . . . .
U
Unconditional jump (NC command E05) 7−84 . . . . . . . . . . . . .
Unilateral air supply with DGP(I)(L)−... A−9 . . . . . . . . . . . . . . .
Upper software end position
Setting with the control panel 6−21 .
. . . . . . . . . . . . . . . . . .
Setting with the control panel (stepping motor) 6−23 . . . .
Usable stroke length 1−8 . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
V
Valve type, Setting with the control panel 6−17 . . . . . . . . . . .
Valve−drive combinations
DGP(L)−... A−4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
DGPI(L)−... A−4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DNC−... A−12 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DNCI−... A−34 . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
DNCM−... A−19 . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
DSMI−... A−25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.