User Manual
D. Index
D−24
Festo P.BE−SPC200−EN en 0901d
Software end position
Definition 3−19 , 3−21 , 3−23 , 3−25 . . . . . . . . . . . . . . . . . . .
Lower 4−21 . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Upper 4−21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
Software end position, Setting with the control panel 6−21 . .
Software versions, Notes XVII . . . . . . . . . . . . . . . . . . . . . . . . .
Speed,
Minimal 1−8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speed switching (example) 7−45 . . . . . . . . . . . .
. . . . . . . . . . .
Speed, maximum,
Configure 7−36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard cylinder A−10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
START input 4−14 . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
Start system, With the control panel 6−46 . . . . . . . . . . . . . . . .
Start−stop frequency (stepping motor),
Setting with
the control panel 6−23 . . . . . . . . . . . . . . . . . . .
START/RESET signal 5−12 . . . . . . . . . . . . . . . . . . . . . . . . .
. . .
Pin assignment 3−43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Start/Stop mode 1−24 , 5−4 , 5−9 , 7−4 . . . .
. . . . . . . . . . . . . .
Status display (status LED) 8−8 . . . . . . . . . . . . . . . . . . . . . . . .
Status display (with the control panel)
Field bus
inputs 6−48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Field bus outputs 6−48 . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
For digital inputs 6−48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For digital
outputs 6−48 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
For flags 6−49 . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
For registers 6−49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
For sensors of the electric axis 6−49 . . . . . . . . . . . . . . . . . .
Status LED
On axis interface 8−6 . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
On supply module PWR 8−4 . . . . . . . . . . . . . . . . . . . . . . . . .
On the I/O function module 8−7
. . . . . . . . . . . . . . . . . . . . . .
Step mode (stepping motor axis) 4−21 . . . . . . . . . . . . . . . . . .
Stepping motor indexer module
XVI , 1−12 , 2−6 . . . . . . . . . . .