User Manual

C. Technical appendix
C−32
Festo P.BE−S PC200−EN en 0901d
C.4.5 Technical specifications of control panel type SPC200−MMI−1F
Type SPC200−MMI−1F
Dimensions
 Height
 Width
 Depth
Approx. 102 mm
Approx. 102 mm
Approx. 37 mm
Weight Approx. 225 g
Temperature range
 Operating temperature
 Storage/transport
0 ... + 50 °C
− 20 ... +70 °C
Relative humidity 95 %, non−condensing
Protection class as per DIN 40050
(DIN EN 60529)
On front side: IP65 (fitted)
On rear: IP20
CE symbol (declaration of conformity)
è www.festo.com
In accordance with EU EMC Directive
Vibration and shock
 Vibration
 Shock
Tested as per DIN/IEC 68 part 2−6:
0.15 mm path at 10...58 Hz;
2 g acceleration at 58...150 Hz
Tested as per DIN/IEC 68 part 2−27:
± 30 g at 11 ms duration; 5 shocks per direction
Electric power supply
 Rated voltage
 Voltage range
 Current consumption
 Protected against incorrect polarity
Phoenix Combicon 3x3.81
24 V
18...36 V
Approx. 100 mA
Yes
Protection against electric shock (protection
against direct and indirect contact acc. to
IEC/DIN EN 60204−1)
By means of PELV power units
(Protected Extra−Low Voltage)
Interface to SPC200
 Specification
 Connection
 Max. cable length
 Pin assignment
RS232 port
8 bits, 1 stop bit, even parity, no handshake,
baud rate 9600 bits/s; 9−pin D−sub−socket
10 m
Pin 2: Received Data (RxD)
Pin 3: Transmitted Data (TxD)
Pin 5: Signal Ground (SGND)
Care and maintenance Clean with a soft cloth