User Manual

C. Technical appendix
C−30
Festo P.BE−S PC200−EN en 0901d
C.4.3 Technical specifications of the I/O function module type SPC−FIO−...
Type SPC−FIO−2E/2A−M8
1) 
(PNP)
Temperature range
 Operation
 Storage/transport
− 5 ... + 50 °C
− 20 ... + 70 °C
Weight 42 g
Relative humidity 95 %, non−condensing
Protection class as per EN 60529
plug connectors inser ted or fitted with
protective cap
IP65
CE symbol (declaration of conformity)
è www.festo.com
In accordance with EU EMC Directive
Vibration and shock
 Vibration
 Shock
Tested as per DIN/IEC 68 part 2−6:
± 30 g at 11 ms duration; 5 shocks per direction
Tested as per DIN/IEC 68 part 2−27:
± 30 g at 11 ms duration; 5 shocks per direction
Digital inputs
 Design
 Protection against incorrect polarity
 Logic level: ON
OFF
 Reference potential
 Current consumption (at 24V)
(input current from sensor to input)
 Response delay (at 24 V)
2 inputs as per IEC 1131−2 type 2 inputs
24 V DC, positive switch. PNP, status display by LED
− 30 ... + 30 V
> 11 V
< 5 V
0 V
At logical 1" typ. 7 mA
Typ. 3 ms
Sensor supply
2)
V
D
24 V ± 25 % Max. 0.5 A (electronic short−circuit protection)
Digital outputs
 Design
 Load capacity per output
1)
 Electronic fuse (short circuit, overload)
Trigger current
Electrical isolation
2 outp. as per IEC 1131−2; 24 V DC positive switching
250 mA
Min. >500 mA
None
Internal current consumpt. of electronics
2)
< 40 mA
1)
External load voltage supply type SPC−AIF−SUP−24V required
2)
Is provided by module SPC200−PWR−AIF (internal electronics, pin 2)