User Manual

B. Optimizing the positioning behaviour
B−2
Festo P.BE−SPC200−EN en 0901d
Contents
B.1 Basic information on control B−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B.2 Description of the controller factors B−7 . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
B.3 Optimize positioning behaviour B−10 . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
B.3.1 Proceed as follows if the compressed air supply is unstable B−16 . . . . .