User Manual

A. Notes on installing the pneumatic components
A−21
Festo P.BE−SPC200−EN en 0901d
· Lubricate the external guide at suitable maintenance
intervals (note manufacturer specifications).
· Use only fastening elements which can permanently resist
the acceleration forces.
Recommendation: Use the following fastening elements from
Festo:
Fastening elements
Type
Base fastening HNC−...
Flange fastening FNC−...
· Use a suitable guide for absorbing lateral forces.
The cylinder, guide, measuring system and load must be rigid
in the direction of movement, have very littl
e play and must
be connected flush with each other.
In positioning applications, use only the following elements
approved by Festo for coupling the mass load to the drive:
Connec
ting element Type
Articulated head SGS−...
· Check the play of the coupling.
The following applies here: Coupling play Ţ 0.05 mm