User Manual

A. Notes on installing the pneumatic components
A−19
Festo P.BE−SPC200−EN en 0901d
Valve−drive combinations with DNCM−...
Recommendation: Use only suitable valve−drive combina
tions. The following diagram shows valve−drive comb inations
for type DNCM−... .
1 Proportional
directional
control valve type
MPYE−5−...−010B
2 Drive diameter
3 Stroke length of
the drive
1
2
3
100 200 400300 500
32
50
MPYE−5−1/8LF−010B
MPYE−5−M5−010B
L[mm]
∅ [mm]
MPYE−5−1/8HF−010B
Fig.A/14: Suitable valve−drive combinations with DNCM−...
The limits related to stroke length and valve types are to be
regarded as flowing. If you wish for a sys
tem with higher dy
namics, you should use the valve with the higher flow in the
limit range. If you attach great importance to control accu
racy, you should
use the valve with the lower flow, providing
this fulfills your requirements as regards the dynamics.