User Manual

8. Diagnosis and error treatment
8−15
Festo P.BE−SPC200−EN en 0901d
Fault class 2: Reser ved
Fault
stage
Fault
message
Operating status / fault explanation Eliminating faults
 zzzyyx02 Reserved
Fault class 3: Initialization phase User data damaged
Fault
stage
Fault
message
Operating status / fault explanation Eliminating faults
A
zzz01x03 User program damaged
zzz = program number
· Carry out Data Reset and
enter or load data again
or
00002x03 Position list damaged
or
· Servicing required
If h f l h
00003x03 Configuration data damaged
gq
· If the fault occurs more than
once, check and if necessary
00004x03 System data damaged
once
,
check
and
if
necessary
replace basic unit
00005x03 Dynamic identification data damaged
00006x03 Static identification data damaged
00007x03 Faulty PROFIBUS configuration data
00008x03 Faulty Interbus configuration data
00009x03 Faulty CANbus configuration data
zzz = Additional information
yy = Fault number
x = Axis identifier (0 = fault is not axis−related)