User Manual
8. Diagnosis and error treatment
8−9
Festo P.BE−SPC200−EN en 0901d
8.2 Fault messages on the control panel
If faults occur, the control panel will display detailed fault
messages (fault codes) coded in the form of a hexadecimal
number. The coded fault messages contain information on:
the fault class
the fault number
in some cases additional information.
Composition of the fault messages
The control panel displays fault messages in the form of an
eight−figure hexadecimal number. The individual positions of
this hexadecimal number contain the following information:
1 Fault class (0...9)
2 Axis identifier
(0...4)
3 Fault number
4 Additional
information
0 0 0 0 0 0 0 0
1234
Fig.8/1: Composition of the fault messages (fault codes)