User Manual

7. Description of the commands
7−46
Festo P.BE−S PC200−EN en 0901d
Example 1 Modify speed; only permitted with pneumatic drives
N010 G00 X0
N011 G25 X60
N012 G01 X500 FX75
N013 G01 X500 FX50
After 60 % of the positioning path from position 0 to position
500, the SPC200 reduces the speed from 75 % to 50 % of the
configured maximum speed.
12
0 100 200 300 400
s[mm]
500
25%
50%
75%
v
1 Speed in % of the configured maximum speed
2 Preselect value of the X−axis
Fig.7/9: Example: Modify speed
(only permitted with pneumatic drives)
Switching to the highest possible speed (NC command G00)
in current operation is not supported.