User Manual

1. Summary of components
1−5
Festo P.BE−SPC200−EN en 0901d
1.1.1 The range of devices for the SPC200
The range of devices for the SPC 200 includes the following
components:
Components
Function
SPC200
type SPC200−...−...
The SPC200 is housed in a rack. Depend
ing on the requirement of the positioning
task you can install the necessary compo
nents in the rack.
Control panel
type SPC200−MMI−1...
The control panel has six buttons with
which all functions can be accessed by
menu.
Control panel type SPC200−MMI−1 can be
placed directly on the SPC200.
Control panel type SPC200−MMI−1F is
intended for mounting in a front plate.
Axis interface
type SPC−AIF−...
The axis interface provides the connection
between the components on the pneu
matic axis and the SPC200. It receives the
values supplied by the measuring system,
passes them onto the SPC200 and pro
vides the positioning signal for the pro
portional directional control valve.
I/O function module
(optional) type
SPC−FIO−2E/2A−M8
This module provides 2 inputs/outputs for
connecting sensors and actuators directly
on the axis. Additional functions, such as
e.g. gripping, lifting, lowering and turning
can be implemented with these sensors
and actuators.