User Manual
6. Operating the SPC200 with the control panel
6−45
Festo P.BE−SPC200−EN en 0901d
6. With the buttonsvV you can now set the positioning
direction (+=in positive direction; = in negative direc
tion; SAVE = save). In order to position the slide and to
set the desired direction, proceed as follows:
Positioning
mode
Description
CONT Hold the Enter button pressed down until
the slide is to stop.
STEP Press the Enter button in order to move
the appropriate step.
7. In order to save the current position, select the command
SAVE with the buttonsvV and press the Enter button.