User Manual

6. Operating the SPC200 with the control panel
6−31
Festo P.BE−SPC200−EN en 0901d
In order to display the NC record on the control panel, you
must position the cursor on the axis identifier and switch
between the configured axes.
P03:N000 G00 *
X+0123.45
P03:N000 G00 *
Y+0100.00
9. In order to conclude the entry of the NC record, make sure
that the cursor is positioned on an NC command, para
meter or operand. Then press the Enter button. The cur
sor is then positioned on identifier N and the NC record is
intermediately saved in the SPC200.
If the Enter button
is pressed when the cursor is positioned
on the identifier for NC record number (N), a copy of the cur
rent NC record will be inserted.
10. Select the next NC record (here N001) with vV.
Proceed with editing the NC record as described.
Always conclude programs with NC command M30
(program end with
repeat) or M02 sub−program end) e.g.
P03:N005 M30