User Manual

4. Commissioning
4−37
Festo P.BE−SPC200−EN en 0901d
JOG AXIS
X: S
TEP
5. Press the Enter button in order to activate the positioning
mode, e.g.:
JOG AXIS STEP
X:+0100.00 +
6. Set the desired positioning direction with the buttons
vV.
7. With positioning mode STEP:
Press the Enter button in order to move one step.
With positioning mode CONT:
Hold the Enter button pressed down for as long as
positioning is carried out.
You can return to the basic setting by pressing the ESC
button several times.