User Manual

Festo SPC−AIF−INC 0406NH English

1 User instructionsEnglish

The axis interface type SPC−AIF−INC is used to connect

pneumatic axes to the SPC200 Smart Positioning Con

troller. It establishes the link with the MPYE−

... propor

tional directional control valve and a drive intended for this

purpose with integrated magnetic incremental measuring

system from Festo, e.g. the stand

ard cylinder type DNCI−...

For the use of the axis interface type SPC−AIF−INC the fol

lowing versions are required:

 SPC200 with operation system as from ve

rsion V4.80

WinPISA as from version 4.40

Detailed information on the axis interface can be found in

the P.BE−SPC200−... User Manual.

Caution

Pay strict attention to the following instructions shown

therein:

 safety guidelines

 specifications for the use of each module and compo

nent.

Warning

Prior to any installation or maintenance work, switch off

the power sources in the following sequence:

1. Compressed air supply

2. Load supply and operating voltage supply for the

SPC200.