S Instruction Manual

Quickstepper
Festo FSS−12−C 0410a English
22
According to the order of the switch steps, only one output is active at a time while
the other outputs are exhausted.
You can control a superordinate signal Emergency stop and the preselects Auto
matic/manual, Continuous cycle/Single cycle of the sequence controller via the
Festo Commander FSSC−12 or via external buttons and logical
elements.
3 Application
The Quickstepper has been designed as a step switcher with 12 steps and start
links. It can be used with a pneumatic command module, e.g. the Commander
FSSC−12, as a pneumatic compact controller in machine controllers.
4Transport and storage
Ensure storage conditions as follows: Short storage periods in cool, dry, shaded
and corrosion−protected locations.
5 Conditions of use
Warning
S Malfunctioning will occur if the device is not used correctly.
S Make sure that the specifications in this chapter are always observed. Only in
this way can you ensure that the product functions correctly and reliably.
S Compare the maximum values in these
operating instructions with your current
application (e.g. pressures, tempera
tures). Only if the loading limits are ob
served can the product be operated in
accordance with the relevant safety
guidelines.
Fig.4
C][%] [bar]