Instruction Manual

DGO−...−A−B
Festo DGO−...−A−B 0410b English
28
S Make sure that the operating medium selected at the start is maintained for
the entire service life of the product.
Changing from lubricated to non−lubricated compressed air:
Wear will increase due to the washed−out service life lubrication.
S Return the DGO−... to Festo for overhaul.
If modifications are made to the project planning:
S
Make sure that the maximum limits are observed, especially for forces and
torques (see Bild8) and maximum speeds (see Fig.9).
9 Care and maintenance
S Clean the cylinder barrel if required with a soft cloth.
The following cleaning agents are permitted: all non−abrasive media.
S Lubricate the DGO−... at the lubricating nipple with Festo special grease type
LUB−KC1 (silicon−free).
Lubrication intervals: every 500 kilometres run
S Note that lubrication must be undertaken more often:
if the drive is operated
in high temperatures
if there is excessive dirt
if there are fat−solvent fluids or fumes in the vicinity.
10 Repairs
S Make use of the opportunity to have your DGO−... overhauled by our repair
service.