Instruction Manual
DGO−...−A−B
Festo DGO−...−A−B 0410b English
20
6 Fitting
Fitting mechanical components
S Avoid damaging the cylinder barrel.
Damage to the cylinder barrel will reduce
the reliability and the service life of the
DGO−...
S Place the DGO−... so that all the operating
parts are accessible (lubricating nipple,
adjusting screws).
S Make sure that the drive is fitted free of
mechanical stress and distortion.
When the
drive is fitted in a vertical position:
S Make sure that the slide has reached a stable position when it comes to a
stand (e.g. the lowest point or secure it with a moveable bolt).
Work loads with their own guide:
Please note
Jamming and non−permitted bending, e.g. due to tilting torques, reduce the
service life of the DGO−....
The max. permitted misalignment of parallel guiding is 1 mm.
S Make sure that a degree of freedom is maintained between the slide and the
work load.
Driver type FKG−... can be used for this purpose.
(see chapter Accessories").
Fig.5
Fig.6
Fig.7