Instruction Manual

3. Installation
3−4
Festo P.BE−CPX−SYS−EN en 0902e
Pre−assembling the connecting cable
Caution
The position of the pins on the plug is different from that
on the socket.
See the manual for the CPX bus node in question for
adescription of the pin assignment of the fieldbus inter
face.
See manual CPX I/O modules" for the pin assignment
of the sensor and actuator connections of input
and out
put modules.
The operating voltage and load voltage connections are
in the form of plugs. The pin assignment can be found in
the following sections.
Use plugs and sockets from the Festo supply programme
which match the outer diameter of the cables used.