Instruction Manual
2. Assembly
2−18
Festo P.BE−CPX−SYS−EN en 0902e
2.3.1 Replacing a complete module or interlinking block
The interlinking blocks in the metal version are each linked to
the adjacent interlinking block or end plate by means of
screws.
1 Connector screws
1
1
1
Fig.2/9: CPX terminal with connection block and interlinking blocks in metal version
Dismantling Proceed as follows in order to remove a complete module or
ainterlinking block:
1. Dismantle the CPX terminal
2. Unscrew and remove completely the two screws on the
interlinking block you wish to remove (see Fig.2/9). The
interlinking blocks are now held together only by
the elec
trical plug connectors.
Caution
Make sure that the electric plug connectors of the interlink
ing blocks are not bent.