User guide

6. Parametrisation
6−14
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
6.3.2 Startup parameter
The module parameters 0 ... 5 are not used and not trans
mitted.
The module configuration (byte 6 + 7) is transmitted from the
master to CPX by means of star tup parametrising. The para
meters are reserved and described in the GSD file.
Both bytes are currently not yet used and reserved for
future
functions.
The data format of the module is specified via the Data for
mat analogue value" parameter in CPX, provided it is sup
ported by the CPX node (see section 1.2).
Standard module parameter (byte 0 to 5)
The standard module parameters in byte 0 ... 5 are not used
by the CMAX.
Module
configuration (byte 6 and 7)
Module configuration 1 and 2
Byte Bit Name Description
6 0 ... 7 Module configuration 1 =: 0 ! (reserved)
7 0 ... 7 Module configuration 2 =: 0 ! (reserved)