User guide

5. Parameter
5−17
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
5.4 Description of the parameters
5.4.1 Overview of parameters
The following overview (Tab.5/14) shows the FHPP’s
parameters. The parameters are described in sections 5.4.2
to 5.4.16.
PNU
1)
Name (DE) Properties
1)
PNU IND Max
()
Class Type Unit RW SH IB NB UL
Device data, see section 5.4.2
100 1 1 Hardware version of
manufacturer
Var int32 0 R
101 1 1 Firmware version of
manufacturer
Var int32 0 R
102 1 1 FHPP version Var int32 0 R
103 X 30 Build version Array char 0 R
104 X 3 Software versions Var int32 0 R
105 1 1 Boot loader version Var int32 0 R
114 1 1 Controller serial number Var bitarray 0 R
116 X 33 FCT project identifier Array char 0 RW UL
120 X 30 Manufacturer’s device name Array char 0 R
121 X 30 User’s device name Array char 0 RW UL
122 X 30 Manufacturer name Array char 0 R
123 X 30 HTTP address of manufacturer Array char 0 R
124 X 30 Festo order number Array char 0 R
130 X 30 Password Array char 0 W UL
133 X 2 Secret system password Var int32 0 RW
140 1 2 System time: Qty. operating
days
Struct int32 0 R
140 2 2 System time: millisec. of the
day
Struct int32 0 R
180 X 30 Name of X−axis Array char 0 RW UL
181 X 30 Name of Y−axis Array char 0 RW UL
1)
see Tab.5/15