User guide

4. Faults and diagnostics
4−20
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
Fault group 3  control error
CPX error group 103 (CPX−MMI: [Control error] ) continued
No. Type
1)
Error handlingCause/descriptionMessage
39 Speed too high with
force control
Configured permissible
speed limit was ex
ceeded with force con
trol.
· Check workpiece,
check speed limit.
Level: F1
Reset: R
Info: x
Nominal speed of the
force record is set too
large compared to the
limit speed.
· Harmonise nominal
speed and speed
limit.
In the event of record se
quencing to force con
trol, the actual speed of
the drive is too high at
the time of switching.
· Reduce the speed
of the previous set;
correct speed limit
and switch off, if
necessary.
1)
Level: fault level, see section 4.2.3; (can alternatively be parametrised as a warning or error)
Reset: behaviour upon reset, see section 4.2.4
Info:  = no info; x = additional info, see FCT or section 4.3.3