Manual
CLR−...
Festo CLR−... 0912d English
26
Fitting the CLR−...
S Place the CLR−... so that no objects project into the swivel range of the
clamping finger.
S Select one of the fastening possibilities listed in the following table.
Double screw connector with foot
fastening type HNA−... in the threaded
holes of the cover screws
With four screws in the threaded
holes of the cover screws:
with flange mounting type FNC−...
direct fastening
Fig.13
The different product sizes have connector threads of the following design and
with the following tightening torques:
CLR−...
12 16 20 25 32 40 50 63
Connecting thread M4 M4 M5 M5 M6 M6 M8 M8
Tightening torque [Nm] 2.5 2.5 3 3 6 6 11 11
Fig.14
S Tighten the screws evenly.