Instruction Manual

DFST
Festo DFST 0710NH
18
5 Fitting
Fitting mechanical components
S Make sure there is sufficient space for
pneumatic connections and a shock
absorber change.
To align the DFST
Please note
Material streams approaching at an angle
reduce the ser vice life of the DFST.
S Make sure that the following points are
observed:
 the material stream impacts both
rollers of the toggle lever.
 the transport direction of the material
stream is aligned exactly vertical to
the roller toggle lever 4
.
With piston rod with fitting can be rotated
by 90° in each of the 4 positions by
moving the guide rod 8.
Secure the guide rod with screw locking
agent when inserting into the new
position.
Fig.7
Fig.8
Fig.9
8