User guide

For the first time, you will need to pair your Bluetooth device with the Ferrari by Logic3 Speaker Dock before you can
play music through the Ferrari by Logic3 Speaker Dock via Bluetooth. Pairing creates a
devices can always recognize each other.
Pairing:
1. o
Source indicator illuminates BLUE and flashes slowly (once every 2 seconds).
LED configuration on Airplay models
2. Press and hold the button on the Ferrari by Logic3 Speaker Dock for more than 10 seconds or until the
3. Activate the Bluetooth on your device to search for other Bluetooth devices (
manual).
4. Search for the device and pair with this device.
5. Once connected, the Bluetooth
icon will be shown on your devices display.
6. Ferrari by Logic3 Speaker Dock will automatically pair with the last paired device.
Bluetooth source indicator status
Flashing Slowly No device paired
Flashing Quickly - Device pairing
Permanently ON Device paired
Playing Bluetooth Music:
 Once your device and the Ferrari by Logic3 Speaker Dock are paired you can start to play music through the
Ferrari by Logic3 Speaker Dock via Bluetooth.
 Press the on the remote control to play your Bluetooth-enabled device. This function is dependent on your
Bluetooth device.
 Press the on the remote control again to pause play; press again to resume it.
 Press the Volume on the Ferrari by Logic3 Speaker Dock or remote control to adjust the system volume.
Using the Video Output
When playing a docked iPod, iPhone and iPad with video capability, the VIDEO OUT connector provides a composite
video output signal that can be viewed on a TV or computer monitor.
To view this video output on your TV or monitor, connect the VIDEO OUT from the GT1 Air to a video input on your TV
using a standard composite video cable (Not Included). Be sure to select the correct video input on your TV.
AirPlay Indicator
Source Indicator