User guide

GT1 Air
1. Dock your iPad, iPhone or iPod on to the Ferrari by Logic3 Speaker Dock.
2. Press and keep the Power/Paring and volume (-) button pressed for 3 seconds or until a message appears asking
to share data.
3. The current Wifi network settings from your Apple device will now be transferred to your Ferrari
by Logic3 Speaker Dock.
4. Wait for the AirPlay Indicator (Red) to turn to a solid Green.
Not Connected
Note: Connecting to a network may take up to 20 seconds. If network connection is unsuccessful please reset
the unit.
A. Press and keep the Power/Paring and volume (+) button pressed for more than 5 seconds or until the Source
B.
C. Source indicator LED will then go out.
If you still have problems connecting the unit to the network, please check your Apple device is connected to
the network and also that your network is operating correctly.
To reset the AP (Access Point)
A. Press and keep the Power/Paring and volume (-) button pressed for more than 5 seconds or until the AirPlay LED
B.
C.
Please power down the unit by holding the power button down for 2 seconds and then pressing it once to
power up the unit and follow steps 1-5.
5. On your Apple device select the AirPlay symbol on your iPod menu and select the Ferrari by Logic3 Speaker
Dock i.e Cavallino Air
Success!
Congratulations, you have successfully connected your unit to your wireless network and now you can start enjoying
wireless audio anywhere in your home or office.
Note: To begin using AirPlay wireless streaming, your AirPlay source (Mac or PC with your iTunes library as
well as your iPod touch, iPhone or iPad) must be connected to the same Wi-Fi network that the unit is
connected to.
3 SECONDS
AirPlay Indicator
Source Indicator
Connected to AirPlay