EN User Guide FR DE Benutzerhandbuch IT ES Manual del Usuario PT Manual do Utilizador NL Gebruikershandboek THE Cavallino FERRARI COLLECTION Cavallino GT1 Air airPlay & bluetooth speaker dock
Introduction Thank you for purchasing the Ferrari by Logic3 Cavallino GT1 AirPlay & Bluetooth Speaker Dock. As with all Ferrari by Logic3 products it has been built to the highest manufacturing standards and tested throughout its development, to ensure you get the best possible product.
Ferrari by Ferrari by Logic3 APP inspired by Ferrari: Alarm Clock World Time Playlists & Music Control Remote Control Dedicated Morphing App to enhance functionality within the Ferrari Speaker Collections Contents Check the packaging for the items shown below. Please retain the packing materials, as this will provide the safest way to transport this product. If any part of the product appears to be damaged, do not attempt to use it.
Bottom Panel AC Socket Composite Video Connection Auxiliary 3.5mm Socket USB Charge Port Setting up your system 1. 2. 3. Select the correct mains power cable for your mains power socket. Connect the small end of the AC power cable into the AC power connector on the base of the Cavallino GT1 Air Plug the other end into a live AC (mains) outlet CAUTION: Do not cover the ventilation openings of the product. Installing the remote control battery 1.
WARNING: Please ensure that the battery is inserted correctly. If the battery is inse rted incorrectly (reversed polarity), this may cause personal injury as well as damage to your Cavallino GT1 Air. 1 - Power Press to turn On/OFF the system Press to select the Source 2 - Source Press to change Source Modes. 1 5 3 - Volume + Press to increase (+) the volume. Press and hold for faster adjustment. 4 - Volume Press to decrease ( ) the volume. Press and hold for faster adjustment.
Docking your iPod, iPhone or iPad Please push the docking tray (A) in order to release the tray. 1 2 Cavallino GT1 (The GT1 will begin to boot up) Wait for AirPlay Indicator Red/ Source Indicator Orange light to go out. S Source will illuminate RED. Place an iPod, iPhone or iPad onto the Apple dock connector 3 The Cavallino GT1 Air will begin to play the music from your playlist. .
AirPlay Indicator Source Indicator GT1 Air 1. 2. Dock your iPad, iPhone or iPod on to the Ferrari by Logic3 Speaker Dock. Press and keep the Power/Paring and volume (-) button pressed for 3 seconds or until a message appears asking to share data. 3 SECONDS 3. 4. The current Wifi network settings from your Apple device will now be transferred to your Ferrari by Logic3 Speaker Dock. Wait for the AirPlay Indicator (Red) to turn to a solid Green.
Music Connectivity Connecting to the GT1 Air You can connect to the GT1 in unit different ways: 1. 2. 3. 4. 5. 6. Using AirPlay to stream wirelessly from iTunes on your Mac or PC (iTunes can stream to multiple AirPlay speakers). Using AirPlay to stream wirelessly from your iPod touch, iPhone, iPad (iOS devices stream to only one AirPlay speaker at a time). Using the iPod dock connector for audio and charging your iPod, iPhone or iPad.
For the first time, you will need to pair your Bluetooth device with the Ferrari by Logic3 Speaker Dock before you can play music through the Ferrari by Logic3 Speaker Dock via Bluetooth. Pairing creates a devices can always recognize each other. Pairing: 1. o Source indicator illuminates BLUE and flashes slowly (once every 2 seconds). AirPlay Indicator Source Indicator LED configuration on Airplay models button on the Ferrari by Logic3 Speaker Dock for more than 10 seconds or until the 2.
Line In / Aux In Connection The Cavallino GT1 also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc and Portable CD Players to be connected for use as a speaker system via the Aux In input. The AUX IN socket accepts a 3.5mm stereo cable plug. 1. Using the appropriate stereo cable, connect your audio device to the AUX IN input. Note: A device must be plugged into the AUX IN connector in order to select the AUX source. 2. 3. 4. 5.
Care and maintenance To clean the exterior surface of your product, you can wipe it using a soft, dry lint free cloth. Do not use solvents, chemicals, or sprays as this may damage the external surfaces and internal components Do not allow liquids to spill or objects to drop into any openings. Avoid products that are abrasive, or contain acid, alkali or anti-bacterial agents.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of un-insulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle alerts the user to the presence of important SAFETY INFORMATION 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions for all components before using this product.
17. Contains small parts that may be a choking hazard. Not suitable for children under age 3. 18. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. 19. Do not let objects or liquids enter the product as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. 20. See product enclosure for safety-related markings. 21.
support@ferrari-by-logic3.com www.ferrari-by-logic3.com Logic3 plc. Rhodes Way, Watford, WD24 4YW, UK Logic3 plc. & Logic3 International Ltd. of Watford UK are the owners of the Logic3 registered trademark. Logic3 own registered and unregistered design rights and copyright subsisting in various products within its range. FERRARI, the PRANCING HORSE device, all associated logos and distinctive designs are trademarks of Ferrari S.p.A.
