Technical Specifications
United States
PH: 810-653-9626
FX: 810-653-8714
Canada
PH: 519-332-6711
FX: 519-332-8610
www.fernco.com
RESIDENTIAL
37
07/08
Qwik Caps / Hose Bibbs
Quick, reusable caps for pipe ends, testing & cleanouts.
Qwik Caps oer a quick, easy way to cap pipe ends, cleanouts
and open test pipes. Made of exible PVC, they’re suitable for
above- ground or underground use, on cast iron, steel, copper
or plastic piping. The convex face allows the cap to withstand
greater pressure for testing purposes and minimizes ballooning.
To install, simply place over open end of pipe and tighten to 60"
Ibs. torque.
• Fast, easy installation.
• Permanent or temporary cap.
• Underground or above-ground.
• Low cost and reusable.
Part No.
Nominal Pipe Size
QC 101 1-1/2" (38mm)
QC 102 2" (50mm)
QC 103 3" (76mm)
QC 104 4" (101mm)
QC 105 5" (127mm)
QC 106 6" (152mm)
QC 108 8" (203mm)
TC-10 10" (254mm)
QC-112 12" (305mm)
Part No. Nominal Pipe Size
HBC-1 1-1/2" (38mm)
HBC-2 2" (50mm)
HBC-3 3" (76mm)
HBC-4 4" (101mm)
Hose Bibbs
Qwik Caps
QC TECHNICAL SPECS
Water Well Debris Traps
Prevents loose debris from plugging pump suction area.
Debris Traps eliminate the common problem of loose dirt and stones plugging the pump
suction area in water wells. The trap is quickly and easily installed over the well casing
and secured with stainless steel clamp. Made of soft exible PVC which conforms to
irregularities of the drilled well. Does not crack or become brittle with age.
Part No. Description
WC-500-238 2” casing x 5” well
WC-600-350 3” casing x 6” well
WC-600-450 4” casing x 6” well
WC-700-450 4” casing x 7” well
WC-700-562 5” casing x 7” well
WC-800-550 5” casing x 8” well
WC-900-550 5” casing x 9” well
WC-800-662 6” casing x 8” well
WC-1000-662 6” casing x 10” well