Assembly Instructions
United States
PH: 810-653-9626
FX: 810-653-8714
Canada
PH: 519-332-6711
FX: 519-332-8610
6
www.fernco.com
07/08
Part No. Description
QS-4 Connects 4” SDR-35 pipe to 8” and larger pipe
QS-4S40 Connects 4” SCH-40 pipe to 8” and larger pipe
QS-6 Connects 6” SDR-35 pipe to 10” and larger pipe
QS-6S40 Connects 6” SCH-40 pipe to 10” and larger pipe
QS-8 Connects 8” SDR-35 pipe to 15” and larger pipe
Part No. Description
QS-5x6HS 5” OD x 6” deep hole saw for plastic pipe
QS-7x6HS 7” OD x 6” deep hole saw for plastic pipe
QS-9x6HS 9” OD x 6” deep hole saw for plastic pipe
QS-5x14CB 5” OD x 14” diamond tipped coring bit for concrete & clay
QS-7x14CB 7” OD x 14” diamond tipped coring bit for concrete & clay
QS-9x14CB 9” OD x 14” diamond tipped coring bit for concrete & clay
Fernco Cutting Tools
If you can
core through it,
QwikSeal can
connect to it.
QwikSeal allows you to connect
service pipe to solid wall, prole,
closed prole and corrugated pipe.
QS TECHNICAL DATA
Corrugated
Concrete & Manholes
SDR-35 Clay
• Meets ASTM C 923
• Colored for easy identication - Grey for Sch. 40
pipe inlet, Green for SDR-35 pipe inlet
• Creates a compression seal that is water tight up to 10 psi
• Can handle up to 7 degrees of deection
• No need to excavate the entire line
• Tap into new, existing and rehabilitated sanitary, storm lines
and retention systems
• Available in 4” , 6” and 8” sizes for fast, simple and
reliable installation
HOT PRODUCTS