Installation Instructions

ManualsBrandsFernco ManualsFlexible Fittings1-1/2" Cast Iron/Plastic/Steel/Lead Qwik Ell Flexible Coupling

August 7,

2008

Qwik Tees And Elbows

for in-wall or other limited space connections

Qwik Tees And Elbows

let you connect all common household drain, waste and

vent pipes quickly and easily without using special tools

or fittings. Because they're exceptionally flexible and

extra long, they're the ideal replacement for fittings cut

out at the joint during alteration or repair. The

connectors are easily installed by tightening the

stainless steel clamps. Made from flexible PVC, Quik-

Tees and Qwik-Elbows come in four sizes (1-1/2", 2",

3" and 4") and fit all common household pipes

including cast iron, steel, plastic, copper and lead.

Reducing sizes are made with separately supplied

bushings.

To Repair Or Replace A Plastic Ell

or Tee

To repair this installed rigid elbow it is first necessary

to cut out the elbow. After cutting, the portion of pipe

that was welded into each socket is lost, and now a

regular schedule 40 fitting can no longer be used in

replacement unless the pipes are extended back to

normal position. Also, the pipes are usually in a fixed

position, making it difficult or impossible to get the

necessary room required to solvent weld a new joint.

The Qwik Elbows and Qwik Tees, however, are

engineered with extra length and flexibility to

compensate for the shortened pipes.

Installation Instructions

1. To remove existing elbow or tee, cut pipe at joints as

shown.

2. Slip Pipe into fitting socket.

3. Securely tighten stainless steel bands. (60" lbs.

torque.)

4. Support pipe on all sides of connection to keep

weight off fitting.

5. Test for leaks before concealing.

Note: Not recommended for underground connections.

For drain, waste, and vent use only. In-wall pipe should

be supported. Do not use in pressure applications.

Tees and elbows adapt to other pipe sizes with Qwik

5:25:51 PM

Page 1 of 2Fernco, Inc.

8/7/2008htt

://www.fernco.com/QT.as

Summary of content (2 pages)

PAGE 1
Fernco, Inc. Page 1 of 2 August 7, 2008 5:25:51 PM Qwik Tees And Elbows for in-wall or other limited space connections Qwik Tees And Elbows let you connect all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they're exceptionally flexible and extra long, they're the ideal replacement for fittings cut out at the joint during alteration or repair. The connectors are easily installed by tightening the stainless steel clamps.
PAGE 2
Fernco, Inc. Page 2 of 2 Bushings. Tees Part No. QT-150 QT-200 QT-300 QT-400 Size 1-1/2" x 1-1/2" x 1-1/2" (38 x 38 x 38mm) 2" x 2" x 2" (50 x 50 x 50mm) 3" x 3" x 3" (76 x 76 x 76mm) 4" x 4" x 4" (101 x 101 x 101mm) Elbows Part No. QL-150 QL-200 QL-300 QL-400 Size 1-1/2" x 1-1/2" (38 x 38mm) 2" x 2" (50 x 50mm) 3" x 3" (76 x 76mm) 4" x 4" (101 x 101mm) Bushings Part No.