Product Overview

No-Hub Couplings
Bi-Directional Shield Design
The shield adjusts to a variety of a pipes diameters
and circumferences to eliminate leaks. The bi-
directional corrugations seal pressure in both
parallel and transverse patterns on the gasket and
pipe to provide a positive, reliable seal.
Specially Beaded Gasket
Meeting the requirements of ASTM C564, the
beaded gasket consists of an elastomeric
compound with strategically positioned grooves
and beads. When tightened, the shield attaches to
the grooves and beads to provide exceptional
sealing pressure and holding power.
Floating Eyelet Design
Fastening the clamps to the shield, the floating
eyelets allow the clamp band and shield to
move independently. This freedom prevents the
shield from crimping and future leakage.
Interlocking Clamp Design
The clamps feature a one-piece screw housing
that mechanically interlocks to the band. This
design eliminates leak paths that occur in staked
or welded clamps.
Replace the less-efficient
hub & spigot material and
connect no-hub cast iron
pipe with Fernco's No
Hub Coupling.
Heavy Duty No-Hub
Couplings conform to CISPI 310, Factory Mutual FM 1680. Couplings
comply with ASTM C564, ASTM 1277, IAPMO file #3198, Commonwealth
of Mas-sachusetts CMR-248 and City of New York MEA 253-98-E. Gaskets
are made from an elastomeric compound that meets the requirements of
ASTM C564.
Standard No-Hub
Couplings conform to CISPI 310. Couplings comply with
ASTM C 1277. Gaskets are made from an elastomeric
compound that meets the requirements of ASTM C 564.
Couplings conform to CISPI 310, Factory Mutual CN 1680. Couplings comply
with ASTM C564, ASTM C1540, IAPMO le #3198, Commonwealth of Mas-
sachusetts CMR-248 and City of New York MEA 253-98-E. Gaskets are made
from an elastomeric compound that meets the requirements of ASTM C564.
Medium Duty No-Hub
T0319
United States
PH: 810-653-9626
FX: 810-653-8714
Canada
PH: 519-332-6711
FX: 519-332-8610
www.fernco.com