Install Instructions

Fernco Wax Free
Urinal Seal
Leak-Free, Hassel-Free, Worry-Free
1) WALL PREPARATION
NEW: Install the hanger brackets
and the drain connection
according to the urinal
manufacturer’s instructions.
REPLACEMENT: Urinal ange wall
adapter must be clean and free
from wax or old sealing material.
4) HANG URINAL
Hang the top of the urinal on the
hanger brackets, then pivot the
urinal down until the seal makes
contact with the urinal. Reach
behind the urinal and press the
adhesive rmly onto the back of
the urinal.
2) PREPARE URINAL
Urinal must be clean, dry, and
free from wax or old sealing
material.
5) SECURE URINAL
Tighten the bolts to secure the
urinal against movement.
Do not over- tighten or the
urinal may break.
3) INSTALL
URINAL SEAL
Insert the Fernco urinal seal into
the wall adapter far enough that
it will not fall out during urinal
installation. Remove white release
paper from adhesive.
6) CHECK FOR LEAKS
Connect water supply and verify
the drain connection
is leak free.
Replace the seal every time...
...or do it right the rst time!
DIMENSIONS
• Gasket Material: Plasticized PVC 75 Conforming to ASTM D 5926
• Adhesive: Permanent Pressure Sensitive Adhesive
Adhesive
www.fernco.com
Discover the Fernco Wax Free Urinal Seal advantages
*Patent Pending
2” Drain Pipe
Urinal
Flange
Strong exible
adhesive
creates a
positive seal
with the urinal