VDS iLOFT MONITOR WITH OSD MENU USER’S MANUAL ENGLISH Cod.
iLoft iLoft VDS VDS Section II - User Manual Congratulations on purchasing this quality product! The iLoft Video Door Entry System monitor, hands free and with a full colour screen that allows you to communicate with the entry panel, see the caller and open the entrance door if you wish. With the onscreen menu you have new features to configure the monitor´s parameters and induction loop. We hope you enjoy its range of functions. www.fermax.com.
iLoft iLoft VDS VDS PROGRAMMING: USER Menu Access the User Menu 1º. To enter in the User menu press «Menu» for 1 second. 1 (*) User Menu Confirmation key 1" ¸ Scroll keys in the menus MENU Programming menu exit key Cancel key Ringtone Selection Within the user menu, the monitor allows you to select an independent melody for the calls from: (*) - the entry panel - secondary entry panel - doorbell.
iLoft iLoft VDS VDS 2. Secondary Panel ............ 3. Doorbell The monitor has two connections (-,T) to connect an external keypad so that when a short occurs between them an identifying call tone is generated. Like previously stated, the doorbell melody can be configured within the melodies menu. ............ Do no disturb (cancel ringtones) Within the same user menu, you can select the Do Not Disturb mode. For this, select the corresponding icon and upon pressing OK you exit the screen.
iLoft iLoft VDS VDS (*) (*) User menu: Doormatic function DISABLED by the installer User menu: Doormatic function ENABLED by the installer By selecting this option you can access the submenu that allows you to enable or disable the doormatic. (*) The user may activate/disable doormatic by selecting the doormatic option and pressing OK. Upon pressing OK you exit the screen menu and see if the doormatic mode is activated with the greed led light.
iLoft iLoft VDS VDS iLOFT MONITOR Led Buttons Buttons Audio Activation, Call Hang-Up and Configuration Settings Button (menu). · Upon receiving a call, (you have 30” to respond before it returns to standby mode. During this time the red led light will turn off, informing you that a call is pending), press this button to talk to the visitor.
iLoft iLoft VDS VDS Lock Release / Call Guard Unit Button · Pressing this button whilst communicating with the Entry Panel will activate the lock release. · Pressing this button whilst the monitor is on standby will result in a call being made to the guard unit (where one exists). Note: If the channel is busy an error tone «BEEP» will sound and auto-start will not activate, nor will the call to the guard unit.
iLoft iLoft VDS VDS Answering a call Hands free mode: When the call button on the Entry panel is pressed a call tone is emitted both from the panel and on the monitor, causing the screen to start up. button to speak with the visitor. The audio channel Press the between the street and the home will be opened; operating in hands-free mode. The communication will automatically end after 90 seconds, or at any time by pressing the button. The led will remain lit (blue) for the duration of the conversation.
iLoft iLoft VDS VDS Quick guide: LED lights blue LED STATUS green LED red LED Not programmed Standby Call/Called Hands free audio Output audio (modo simplex) Input audio (modo simplex) Do not disturb Doormatic Do not disturb + Doormatic STATUS LED On Very slow flashing (0.1’’ ON - 5’’ OFF) Slow flashing (1’’ ON - 0.5’’ OFF) EN MAINTENANCE (CLEANING) EN Do not use cleaning products which contain acids, vinegar or are abrasive in nature. 1 EN Pag 22 2 1º. Use a damp cloth. 2º.
