Installation Instructions

Page 13
answer, the call divert APP will start to ring
DATE FORMAT: Date format.
DATE: Setting the date of the panel.
TIME: Setting the time of the panel.
TIME ZONE: Setting the time zone of the panel.
DST: Enable the daylight saving time option.
Select local time zone and save.
If the project has no management software the installer can set date, time and time zone
manually. If the project has management software, the date and time of panel will synchronizes
automatically with the management software. If the panel has access to internet, the date and
time of panel will also synchronize with internet time server.
NOTE:
Date and time can’t be saved after power loss, the time zone and date format can be saved.
Network Settings
MEET allows the installer to define the IP range according to the project needs and make the
network management easier. MEET panel network mode is static mode. Ensure that each
device has a unique IP address in same installation. The devices (digital panel, monitor and
guard unit) will show IP conflict if there same IP is used on the same LAN.
IP: IP address of the panel (default option 10.1.0.1).
MASK: Subnet mask of the panel (default option 255.0.0.0).