Manualshelf

Installation Instructions

ManualsBrandsFERMAX ELECTRONICA ManualsMarineMEET MARINE PANEL
11121314151617181920
Table Of Contents
Page 11
General Settings
Configures the panel type: General entrance panel or block panel.
3.2.1 General Entrance Panel
DEVICE NO.: General entrance panel number, between 1 and 9000.
TYPE: For General Entrance select G.E.PANEL. The panel can communicate with all devices
of the installation.
LANGUAGE: select the desired language in the dropdown options. (default option ENGLISH).
Refresh the webpage after change the language.
INFORMATION: 9901 GUARD UNIT, Prompt information to be displayed on the panel, between
9901-9998, default option 9901. It is possible to modify the number according to the Guard Unit
that each panel will call.
PANEL VOLUME: Select the desired value between 1 and 5, default option 4.
The conversation volume is common for uplink and downlink.
DOOR OPEN VOICE: Open door voice prompt can be enabled or disabled. The default is
enabled.
VIDEO RESOLUTION: In order to fit the different types of monitor. The default value 640×480
is to be used usually.
SIP DIVERT MODE: (this feature may not be available at the time of releasing the manual)
PARALLEL CALL: When the panel calls the resident, the monitor and the call divert APP ring
at the same time. Once one terminal answers the call the other one stops ringing.
SEQUENTIAL CALL: When the panel calls the resident, the monitor will ring about 30s if no
answer, the call divert APP will start to ring
DATE FORMAT: Date format.
DATE: Setting the date of panel.
TIME: Setting the time of panel.
TIME ZONE: Setting the time zone of panel.
DST: Enable the daylight saving time option.
Select local time zone and save.
If the project has no management software the installer can set date, time and time zone
manually. If the project has management software, the date and time of panel will synchronizes
automatically with the management software. If the panel has access to internet, the date and
time of panel will also synchronize with internet time server.
NOTE:
Date and time can’t be saved after power loss, the time zone and date format can be saved.