User manual

6 Ferm
EN
Features
Fig.A
1. On/off switch
2. Locking nut
3. Cross guide
4. Saw blade holder
5. Protective cover
6. Spanner
7. Dust blow pipe
8. Rubber feet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Wear ear and eye protection
Specific safety instructions
• Wearsafetygogglesandadustmask.
• Thisscrollsawmachineisforindooruseonly.
• Ensurethattheteethofthesawpointdownwardspriortousingthemachine.
• Ifteethofthesawbladearemissingoraredamaged,thenthesawblademustbereplaced
immediately.
• Usethescrollsawmachineonastableandflatsurface.
• Neverexertpressureonthesidesofthesawbladebecauseitmaybreak.
• Checkwoodenworkpiecesforpossibleprotrudingnailsetc.andremovethese.
• Donottouchthesawingsurfacewithyourhands.
• Neverleavethesawingmachineunattendedwhileitisrunning.
• Donotremoveanywooddebrisetc,inthevicinityofthesawwithyourhandswhileitisrunning.Turn
the machine off before removing the wood debris.
Immediately switch off the machine when
• Interruptioninthemainsplug,mainsleadormainsleaddamage.
• Defectswitch.
• Smokeorstenchofscorchedisolation.
Electrical safety
When using electric machines always observe the safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also
the enclosed safety instructions.
Always check that the power supply corresponds to the voltage on the rating plate.