Instruction manual

8
EN
Cleaning
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the
ventilationslotsfreefromdustanddirt.Ifthedirt
does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Troubleshooting
Pleasendsomepotentialcausesandsolutions
to possible failure.
1 The operating switch is switched on, but
the motor is not working
• Theelectriccircuitisbroken
• Havetheelectriccircuitrepaired
• Wiresinthemainsplugorinthesocketare
loose
• Havesocketandplugcheckedorrepaired
• Theswitchisfaulty
• Havetheswitchrepaired
 
• Bluntordamagedcutter
• Re-sharpenorreplacecutter
• Variablespeedsetlow
• Increasevariablespeed
• Motorisoverloaded
• Reducepushingforceonrouter
3 Excessive vibration
• Bentcuttershank
• Replacecutter
4 Sparks inside the housing
• Carbonbrushesareworn
• Replacethecarbonbrushes
Faults
Should a fault occur, e.g. after wear of a part,
please contact the adress on the warranty card.
Includedyoundanexplodedviewshowingthe
parts that can be ordered.
Environment
Inordertopreventthemachinefromdamage
during transport, it is delivered in a sturdy
packaging. Most of the packaging materials can
be recycled. Take these materials to the
appropriate recycling locations.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.

The guarantee conditions can be found on the
separately enclosed guarantee card.
The product and the user manual are subject to
change.Specicationscanbechangedwithout
further notice.