Operation Manual

4
EN
CORDLESS SCREWDRIVER
CDM1080
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2 - 3.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Introduction
This screwdriver is intended for tightening and
loosening screws (g. 2 - 9). The screwdriver is
not suitable for screwdriving heavy constructions,
for example repairing a big fence.
Contents
1. Technical specications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Charging the battery
6. Service & maintenance
1. MACHINE INFORMATION
Technical specications
Charger input AC230V/50Hz/6W
Charger output 6VDC/300mA
Battery capacity 1.1 Ah
Charging time < 5 hours
Max. torque 3.0 Nm
No-load speed 230 r/min
Weight 380 gr.
L
PA
72.1 dB(A)
L
WA
86.1 dB(A)
Vibration < 1.235 m/s
2
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may signicantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signicantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Cordless screwdriver
1 Charger
1 Magnetic bit holder
18 Accessories
1 Instruction manual
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.