User manual

6
EN
Kickback is usually caused by:
- unintentionally touching hard objects or
materials with the rotating saw blade;
- a blunt saw blade;
- a saw blade that is not properly mounted;
- sawing into a previous cut;
- a lack of attention to the operation;
- an instable stance.
ELECTRICAL SAFETY
3
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
● Donotusethemachineifthemainscableor
the mains plug is damaged.
● Onlyuseextensioncablesthataresuitablefor
the power rating of the machine with a minimum
thickness of 1.5 mm
2
.Ifyouuseaextension
cable reel, always fully unroll the cable.

Ifthemoulded3-pinplugattachedtotheunitis
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
approvedBS1363/5Afusedplugandthatthe
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable of
the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
- The wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black.
- The wire which is coloured brown must be
connected to the terminal which is marked with
theletterLorcolouredred.
TECHNICAL DATA
JSM1014
Mainsvoltage V~ 230
Mainsfrequency Hz 50
Powerinput W 710
No-load speed min
-1
 800-3,000
Max.sawingdepth(wood) mm 110
Max.sawingstroke mm 20
Mitreangle ° 45
Number of pendulum positions 4
Weight kg 2.55
NOISE AND VIBRATION
JSM1014
Soundpressure(L
pa
) dB(A) 91
Acousticpower(L
wa
) dB(A) 102
Uncertainty(K) dB(A) 3
Vibration(wood) m/s
2
7.1
Vibration(metal) m/s
2
 10.2
Uncertainty(K) m/s
2
1.5
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
60745;itmaybeusedtocompareonetoolwith
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
maysignicantlyincreasetheexposurelevel
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signicantlyreducetheexposurelevel
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
yourhandswarm,andorganizingyourwork
patterns

Your pendulum action jigsaw has been designed
for sawing wood, metal, plastics, ceramics,
rubber,etc.toanyrequiredsizeandinany
required shape.
 1. On/offswitch
 2. Lock-onbutton
 3. Speedadjustmentwheel
4. Pendulum action switch
5. Guard
 6. Sawbladeholder
 7. Sawshoe
 8. Lockingboltforparallelguide
 9. Dustextractionconnection
10. Grip
11. Allen key
12. Allen key holder