User manual English
SAFETY MEASURES We request that you read the instruction manual and recommendations set forward therein. Also remember to correctly position the satellite antenna! In order to avoid an electric shock, warranty seal shall void the warranty. never open the housing. Damage to the Disconnect the device from the mains during thunderstorms or when it is not to be used for an extended period of time. Please remember that the warranty does not cover damage to the equipment caused by a lightning strike.
ABOUT THE INSTRUCTION MANUAL Ferguson Sp. z o.o. has made every effort to provide the most current information about its products. Ferguson Sp. z o.o. does not grant any guarantee as to the contents of the present instruction manual and disclaims any implied guarantees concerning market value or suitability for specific purposes. The information contained herein is an instruction intended to enable the correct usage and maintenance of the device. Ferguson Sp. z o.o.
BASIC INFORMATION The smart controlled WiFi plug is designed with the latest advanced WiFi technology. The WiFi plug is an APP controlled device combing with WiFi connection, mobile phone (or tablet) or a server. This device could be controlled via an APP installed in an Android & IOS smart phones or tablets. The APP apply WiFi and Cellular mobile network signal to connect the device, then user can setup the APP to intelligently implement local or remote turn ON/OFF control.
Appearance 5 Function Details 1 Wifi indicator 1. LED blinks when WiFi connected successfully. 2. LED flash rapidly when WiFi connection failed or connected abnormal. 2 Manual control 1.In need to manually power control, once clicking the button to turn button on, twice to button off. 2.To reset factory default, press the button about 5 seconds till LED flash rapidly. 3.When power turn on, LED turn on, power turn off, LED turn off too. 4.
Quick Install Guide Below Hardware devices are necessary before configuration 1) Properly work WiFi router. 2) APP devices like mobile phone, tablet etc(Android and IOS). Configurations steps Step 1. Search the Apple App Store or Google Play for “WeConn”. You can use the direct links to the application. For this purpose scan, one of the following QR codes. Download and install the app. Step 2. Check if app device(mobile phone or tablet) is normally connected to the WiFi router which need to be configured.
Step 4. Adding new device 1. Input WiFi SSID 2. Input WiFi Password 3. Start configuration "on-site" indicates the current status of the LAN 1. Control key 2. Edit device name 3. Lock: When set to lock only administrator control, when set as unlock, related members also could control. 4. Refresh data Step 5.
Remote control condition The number of personnel allowed to control The current online personnel number Historical records Step 6. AP mode Press the button for about 10 seconds, until LED flash slowly from quickly, then release the button, now WiFi plug work as AP mode. Step 7.Connect the AP mode operation method Scan and connect the WiFi plug SSID in smartphone or tablet. The plug SSID comes with "WeConn"& plug Mac address.
APP control reset and delete operations WiFi plug On device list choose “on-site” (online) device press and hold 2 seconds to see reset device info. On device list choose “out-site” (offline) device press and hold 2 seconds to see delete device info. Control permissions settings 1. Device name 2. Mac address 3. The blue list represents your own APP device. 4. The black list represents APP devices form other 5.
Specification Protocol and plug Standard Wireless Standard IEEE802.11b/g/n Operation Frequency ISM band, 2412~2483.
