User's Manual
Table of Contents
Warranty …………………………….…..…………….………………. 3
HP & LP Regulators ………....…………..….……..………………….. 4
Care & Maintenance …………………….….……..…….…………….. 4
Trigger Adjustment ……………………….….………….………...…... 5
.
Electronics & Operation …………………....….….……………….….. 5
LED Colors and Meanings …...................……….…...….…………... 6
Trigger Programming ….............……………….….....…………….. 6
Terminology …………..………………….……...…………… 10
Maintenance Mode ........................…………….…...……………. 11
The Quest Equalizer Special Feature……………………...………….. 12
The Quest Schematics…………………………………...………….… 13
Body/Solenoid ………………………………………...……… 13
Ram Valve System ……………………………………....…….… 14
Low Pressure Regulator ………………………….……......……. 15
Inline Regulator …………………………………………....…. 16
Frame/Board ………………………….……………………...... 17
Troubleshooting ……………………………………….....……...……. 18
Technical Support ……………………………………......…..……….. 19
Warnings
• The Quest paintball marker is not a toy. Misuse may cause serious injury or death.
• Read entire owners manual before operation.
• Paintball industry standard gear designed specically for paintball and meet ASTM
standard F1776 (USA) or CE standard (Europe) must be worn at all times under
operation by user and anyone within range of a paintball projectile.
• Recommend at least 18 years of age to purchase and use. Persons under the age of 18
recommend adult supervision.
• Do not exceed 850 psi input pressure.
• Use compressed air/nitrogen only. Do not use CO2 as a source of air.
• Use only factory-approved grease in The Quest. All others will void warranty.
• Always turn off and insert a barrel-blocking device while The Quest is not in use.
• Always chronograph The Quest not to exceed 300fps before each game of play.
• Never look down the barrel or unscrew the bolt/pin assembly while The Quest is aired
up.
• Never insert any item other than a 0.68 caliber paintball into The Quest breach.
• Always dry re The Quest after air has been removed to ensure no air is stored in the
marker.
• If you do not understand any information included in this manual please contact tech
nical support found on the last page of this manual for further instructions.
2