Information

ANSI/NEMA FL-1 standard
D. Fenix tests the impact resistance according to the ANSI Standard.
Impact Resistance Test:
Samples should be in the “off” position with batteries in
place. Each sample is dropped 6 times using impact
orientations that approximate a cube. Each sample must be
released on each orientation of the approximated cube.
Test samples must pass a drop test from a minimum of 1m
in order for the impact resistance claim to be made.
Dropped samples must not exhibit any cracks or breaks
visible with normal vision. Cosmetic defects such as scuffs,
scratches, burs, abrasion will not be considered reasons for
failure.