Service Manual

Table Of Contents

627333-A 8-19

Cab Air Suspension

CAB AIR SUSPENSION INSTALLATION

FIG. 4: Place the suspension in the support on the

chassis. Place and thighten the three bolts (1) holding

the suspension to the chassis.

Connect air line to height control valve.

FIG. 5: Lower the cab.

1. Remove the lock pin from it’ locking position;

DANGER: Make sure there’s nobody

under the cab.

2. Open the knob (CCW) on the handpump, to

depressurize the system. The cab will lower by its

weight;

The rear cab suspension will lock its self.

Have the knob in the “open” position.

3. Restore the lock pin with retainer in his locking

positon underneath the cab;

4. Remove the pump lever of the pump. Place the

pump lever back to the storage compartment;

5. Close the engine hood;

6. Place back the side panels.

FIG. 4

q000181s

FIG. 5

q000180s