Service Manual

Table Of Contents

627333-A 3-57

Drive line

1. Measure from the face of the axle (180 mm);

2. Measure from the face of the axle (178 mm);

3. Torque the bolts of the cross bearing with 255 Nm;

Use a ring spanner.

4. Torque the bolts of the roller bearing with the

special wrench with 7,5 Nm. See “Mounting

instruction for SKF ConCentra roller bearing units,

SYNT” in the front of this chapter;

FIG. 11

Drive direction

Q000099S