User Manual

212
FAULTS AND REMEDIAL ACTIONS
Move Quick Lift switch fully or turn ignition off and on again.
Move Quick Lift switch fully or turn ignition off and on again.
Rear/front automatic mode on/off switch faulty.
Automatic mode stop button faulty.
Call up fault code and refer to the code table for what measures to take.
No pressure, speed or volume monitoring.
It is essential to determine the cause of the fault immediately using the code table
(see FAULTS AND REMEDIAL ACTIONS Section 5).
Display accompanied by a continuous beep and warning light.
Electronic connections between components are faulty or cut. Other fault codes may
occur.
In the event of failure of the forward/reverse indicator lamps, the backup indicators
can be activated (see also OPERATION Section 26.5).
Try engaging with another button (5 seconds).