User Manual

240
FAULTS AND REMEDIAL ACTIONS
Electric valves (oeprating console)
Fault code
Cause
Effect and remedy
A.1.C0
Control console not available,
e.g. CAN-bus not connected.
No automatic mode. No general locking
of valves.
A.1.C1
Automatic mode button faulty.
No automatic mode.
A.1.C2
Overall locking key faulty.
No overall locking of valves.
A.1.C3
Floating position button faulty.
No floating position.
A.1.C4
Timer function button faulty.
No timer function.
A.1.C5
Crossgate lever/joystick swit-
chover button faulty.
Not possible to switch between crossgate
lever operation and joystick operation.
A.1.C6
Operating console CAN bus
faulty.
Change of status not detected. Switching
on/off is ignored. Valve locked.
A 1.C7
A.1.C8
A.1.C9
A.1.CA
A.1.CB
CAN joystick not available.
Not possible to operate valves.
A.1.CC
E-Box and CAN joystick CAN
connection faulty.
Limited operation of valves.
Electric valves (crossgate lever)
Fault code
Cause
Effect and remedy
A.1.B0
Crossgate lever not adjusted.
Valves cannot be actuated. Carry out ad-
justment.
A.1.B1
Signal fault.
Valve position cannot be controlled pro-
perly.
A.1.B2
A.1.B3
A.1.B4
A.1.B5
Crossgate lever recognition of
centre position faulty.
Valve position cannot be operated accu-
rately. Calibrate.
Electric valves (buttons / switches)
Fault code
Cause
Effect and remedy
A.1.FA
External valve actuation. Spool
valve external pushbutton for
rear LIFT faulty.
Rear external controls not working.
A.1.FB
External valve actuation. Spool
valve external pushbutton for
rear LOWER faulty.
Rear external controls not working.
A.1.FC
External valve actuation. Spool
valve external pushbutton rear
actuates twice or pushbutton is
faulty.
Change controls or exchange keys.
A.1.D1
Valve 3, signal disturbed or
faulty valve.
'Lift' and/or 'Lower' valve 3 faulty.
A.1.D3
Valve 4, signal disturbed or
faulty valve.
'Lift' and/or 'Lower' valve 4 faulty.
A.1.D4
Faulty solenoid switch for re-
lease of external controls of
standard front power lift.
Position of shutoff cock for front power lift
cannot be detected.
A.1.D5
External front power lift 'Lower'
button faulty.
Front power lift cannot be lowered pro-
perly.